The Series «M» pressure regulator is available with G1/8 and G1/4 ports. Its design incorporates a diaphragm and relieving so as to allow decremental adjustments as well.
Microregulators are available with different regulation types: non-relieving,very sensitive self-relieving(through a light air leak) and VS (valve with fast draining).

R46 Miniature Non-repairable Pressure regulators for air compressor.

Miniature air regulator-RA4-01-FG,RA4-01-F000

Norgren Air Regulator and filters-B07-200-02MG

Electrical contact with the traditional pressure switch, pressure gauge ratio, What are the advantages?
1. Electronic screen reading easier and more accurate
2. Longer life
3. Seismic performance, the reading does not shake
4. A higher measurement accuracy
5. Does not require an external relay
6. Product price is relatively cheaper

Mainly use for Ecological agriculture irrigation .

These valves can be easily interfaced with circuitboards and miniaturized components. The versatilityis for connecting electronic signals to pneumatic ouputs. The small size is ideal for stand alone(with #10-32 ports) or multiple valves mounted on one manifold. May be used to pilot larger valves. These valves are ideal for micro electronic production equipment, medical or chemical applications, or for water injection applications such as those found in engines. They can operate directly from most programmable controllers

This series solenoid valves adopts intergral slot slide valve structure and the valve hole is machined by special high precision finishing process,with the characteristics of handsome appearance,quick change,reliable performance and automatic compensation for wear of seal element.The valve can be subdivided into two-position& Three-ports and two-position&five-ports in function.The control mode is subdivided into single and double electric control,single and double pneumatic control.

Colour on your demand.


4V series solenoid valves have 5/2 and 5/3 types, size from M5 to 1/2’’, while 5/2 typs have single solenoid type and double solenoid type, Single solenlid valves is repositioned by the spring, and the double solenoid vavle is repositioned by the coil. 5/3 type solenoid valve can make the cylinder piston stop at any position.

4A series air control valve have 5/2 type and 5/3 type, about the 5/3 air control valve, there are still 3 types, including center close, center pressure and center open. Size range from M5 to 1/2’’, many superficial treatment are available, thread standards can be G, NPT, PT etc.
This series pneumatic valves control spool displacement by pneumatic signal to change the position of valves,with good change over property,and long service life.It is widely applied to the executive elements such as drive air cylinder in pneumatic system and to safety operations at inflammable and explosive places.

SDA series thin cylinder design made for the Asian market, the bore from 12mm to 100mm is optional. As to the acting type we have double acting, double adjustable acting, single extend acting, single return acting etc. The rod side teeth within conventional-shaped teeth, outer teeth, toothless three kinds of connections. The crash pads buffer types effectively reduce the impact on the cover.

CDJ2B series smc type air cylinders

EPA Special cylinders-EPA16-25-40T,EPA16-20-22N

CQ2A/CQ2B SMC type air compact cylinders

The shuttle valve integrates 2 one-way valves. Usually, it is used high and low pressure output and automatic&manual equipments.

The accessory control valve are not usually used in the unit pneumatic system, mainly work with other directional valve. Including speed control valve, one way valve, slide valve, exhaust valve etc. These valves supply the great assistance to the directional valve, in order to complete the whole control in the pneumatic system.

Both ends are with female thead.

Right Angle Pulse solenoid valves-DMF-Z-40S,DMF-Z-50S

Most general style. Control the speed rate of air coming. The flow rate of air entering from the thread side can be controlled, whereas air entering from the tube side comes out from the thread side at the same (not controlled) flow rate.

Plastic fitting is the most popular fitting. There are many types. For instance, straight, bulkhead, reducer, elbow, Long socket elbow, Branch Y, Branch T and Branch double, Different diameter triple double etc. PT thread, G thread, inch NPT thread etc are available. We sell a lot all over the world.